Posted  by 

Ibm Server X3300 M4 Drivers Download

IBM Support, Fix Central. Select from System x3500 M4. Fixes or other software downloads) provided on the Fix Central website is subject to the terms. Drivers for IBM System x3300 M4 -[7382AC1]. For this model of laptop we've found 12 devices. Select device for driver's downloading. IBM Support, Fix Central. Select from System x3500 M4. Fixes or other software downloads) provided on the Fix Central website is subject to the terms.

The ServerGuide CD includes utilities and drivers. The System x3300 M4 server. IBM plans to make the Machine Code changes available for download from the IBM. The System x3300 M4 server is a. To load software and drivers. IBM plans to make the Machine Code changes available for download from the IBM System x. The Lenovo System x3300 M4 is a high-throughput network server. Automatic Server Restart, IBM Systems. You must download the drivers separately. Shop IBM x3300 M4 7382IA4 Server Online with Great. Driver bays available in IBM x3300 M4 server is Eight 2.5-inch hot-swap or four 3.5-inch hot/simple.

IBM United States Hardware Announcement 112-130
July 31, 2012
Table of contents
Overview Publications
Key prerequisites Technical information
Planned availability date Terms and conditions
Description Prices
Product positioning Order now
Product number

At a glance

IBM® System x3300 M4 servers feature:

  • A 1.8 GHz/6.4 GTS-10 MB 4C Intel™ E5-2403, a 2.2 GHz/6.4 GTS-10 MB 4C E5-2407, a 1.9 GHz/7.2 GTS-15 MB 6C E5-2420, a 2.2 GHz/7.2 GTS-15 MB 6C E5-2430, or a 2.4 GHz/7.2 GTS-15 MB 6C E5-2440, Intel Xeon™ processor data bus to the system with one QPI link.
  • 2 GB or 4 GB of 1333 MHz DDR3 ECC system memory1; 48 GB maximum or 384 GB maximum when 32 GB DIMMs installed; Express® models have 8 GB.
  • Eight-port SAS/SATA with RAID controller.
  • One fixed 460-watt 80 Plus Bronze certified power supply fitted standard; one hot-swap 550-watt 80 Plus Platinum certified redundant power supply on Models D2, D4,and F2.
  • Integrated management module (IMM2).
  • Five PCI-Express card slots standard, one PCI-Express card slot enabled with dual processors, and one optional PCI-X card slot when using interposer card.
  • Support for up to sixteen 2.5-inch drives plus one standard optical drive and one optional half-height tape drive, or up to eight 3.5-inch drives plus one standard optical drive and one optional half-height tape drive.
  • Up to 16 TB2with 1 TB 2.5-inch HS NL SFF SAS/SATA disk drives.
  • Intel I350CM2 integrated Quad Gigabit Ethernet controllers, two ports standard and two more ports using Software license key and SAS or SATA support.
  • SVGA video with 16 MB memory shared.
  • Support for optional Remote Presence function.
  • 4U tower industry-standard models, rack mount through special bid or option.
  • Two USB front and four USB rear ports, two USB internal port, one d-sub connector, four 10/100/1000 RJ45 ports, and one serial port.

For ordering, contact your IBM representative, an IBM Business Partner, or IBM Americas Call Centers at 800-IBM-CALL (Reference: YE001).


Back to top
Overview

The System x3300 M4 servers include:

  • Quickpath Interconnect (QPI) support for 6.4 and 7.2 Gigabit transfers per second (GTS), supporting one QPI link.
  • Two simple-swap fans standard with single processor or three simple-swap fans standard with dual processors. Optional redundant cooling option and power supplies are available.
  • Five PCI-Express card slots standard; one PCI-Express card slot enabled with dual processors; and one optional PCI-X card slot when using interposer card.
  • Integrated dual Gigabit Ethernet, quad with software upgrade.
  • RAID-0, RAID-1, and RAID-10 support standard or optional RAID-1E, RAID-5, RAID-10, and RAID-50 using a PCI-E adapter.
  • DDR3 ECC DIMMs, combined with an integrated ECC memory controller in core logic that corrects many soft and hard single-bit memory errors and minimizes disruption of service to LAN clients.
  • Integrated management module (IMM2) with optional Remote Presence function.
  • Light path diagnostics with a light path panel visible at front of chassis.

Powered and scaled for business growth

  • These servers contain one of the following:
    • A 1.8 GHz/6.4 GTS-10 MB 4C Intel E5-2403, a 2.2 GHz/6.4 GTS-10 MB 4C E5-2407, a 1.9 GHz/7.2 GTS-15 MB 6C E5-2420, a 2.2 GHz/7.2 GTS-15 MB 6C E5-2430, or a 2.4 GHz/7.2 GTS-15 MB 6C E5-2440, Intel Xeon processor data bus to the system with one QPI link.
  • Either a 1066 MHz or 1333 MHz functional speed processor operations to memory.
  • 2 GB or 4 GB of high-speed DDR3 - 1333 MHz ECC memory1, 48 GB maximum using 4 GB memory DIMMs6, or 384 GB maximum using 32 GB memory DIMMs7, Express models come standard with 8 GB.
  • High-speed, wide-bandwidth slots: Five PCI-Express card slots with single processor, one more PCI-Express card slot with dual processors, and one optional PCI-X card slot when using interposer card.
  • Intel I350CM2 integrated Quad Gigabit Ethernet controllers, two ports standard and two more ports using Software license key and SAS or SATA support.
  • Standard SATA DVD-ROM and tape drive bay.
  • Eight standard 2.5-inch hot-swap drive bays and up to sixteen 2.5-inch bays available when using upgrade options with total HDD storage capacity of 16 TB, when using 1 TB Near-Line SFF SAS/SATA HDD options.

High availability for around-the-clock business demands

  • Integrated management module (IMM2) and support for the optional Remote Presence function.
  • Wake on LAN.
  • ECC memory to detect double-bit errors and correct single-bit errors.
  • Integrated memory mirroring and sparing.

Service and support perfected for business needs

  • ServerGuide and IBM Director.
  • IBM Server support and web support3.
  • Three-year, customer replaceable unit (CRU) and on-site service4, limited warranty5; optional warranty service upgrades available.

Note: For configurations that support the RAID battery, the RAID battery will be warranted for one year effective on its 'date of installation.' All other product warranty terms for the machine remain unchanged.

IBM x3300 M4 Express Models

New System x® configurations are being added to the IBM Express Portfolio™ , designed and priced meet the needs of mid-sized businesses. Reliable and easy to manage, Express models and configurations vary by country. They further enhance the ease of doing business with IBM by offering a robust portfolio of products supported by aggressive pricing and simplified incentives.

The latest System x Express models consist of relevant system configurations for the System x3300 M4 servers.

System x Express servers deliver robust capabilities while taking into account limited resources and budgets. Find the right hardware for your business needs today, while helping to protect your investments with flexible, scalable products that can grow with your business.

Notes :

Ibm Server X3650 M4 Driver Download

1DDR3 1333 RDIMM memory. DDR3 memory stands for double data rate, which means up to twice the data is transferred compared to SDRAM in the same clock cycle.

2When referring to HDD or tape backup capacity, GB stands for 1,000,000,000 bytes and TB stands for 1,000,000,000,000 bytes. User capacity may vary depending on operating environments.

3Some programs may not be available in all countries.

4With respect to on-site service, you may be asked certain diagnostic questions before a technician is sent.

5For information on the IBM Statement of Limited Warranty, visit

http://www.ibm.com/servers/support/machine_warranties/

This information is also available by calling 800-426-7378 or contacting your IBM representative or reseller. Copies are available upon request.

6Twelve DIMM slots that enable you to deploy up to 384 GB of DDR3 SDRAM Registered DIMM memory, with 12 slots populated with 32 GB DIMMs optional, 2 GB or 4 GB memory standard.

72.5-inch Drive bays provide 8.0 TB using 8x 1 TB SFF SAS HDD options, this can be doubled to 16 TB with optional 8x 2.5-inch HDD upgrade. (Special bid models support up to sixteen 2.5-inch bays with an additional 8 TB of HDD capacity for a total of 16 TB).

3.5-inch Drive bays provide 12 TB as standard using 4x 3 TB LFF SAS/SATA HDD options. This can be doubled to 24 TB with optional 4x 3.5-inch HDD upgrade. For the latest information on supported HDD options, visit

http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/
Feature exchange

None


Back to top
Key prerequisites

  • Monitor
  • Keyboard (only in EMEA and United States, Latin America, and Canada)
  • Mouse (only in EMEA and Untied States, Latin America, and Canada)

Back to top
Planned availability date

August 22, 2012: System x3300 M4 - 7382


Back to top
Description

Related options

IBM memory options

  • 2 GB (1 x 2 GB, 2R x 8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM (49Y1392)
  • 2 GB (1 x 2 GB, 1R x 4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM (49Y1393)
  • 4 GB (1 x 4 GB, 2R x 4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz LP RDIMM (49Y1394)

IBM processor options

  • Intel Xeon Processor E5-2403 4C 1.8GHz 10MB Cache 1066MHz 80W (00D2581)
  • Intel Xeon Processor E5-2407 4C 2.2GHz 10MB Cache 1066MHz 80W (00D2582)
  • Intel Xeon Processor E5-2420 6C 1.9GHz 15MB Cache 1333MHz 95W (00D2583)
  • Intel Xeon Processor E5-2430 6C 2.2GHz 15MB Cache 1333MHz 95W (00D2584)
  • Intel Xeon Processor E5-2440 6C 2.4GHz 15MB Cache 1333MHz 95W (00D2585)

These 4C and 6C processors are ideal for0' cellspacing='0' cellpadding='0' summary='layout'>Product positioning

The System x3300 M4 server is positioned above the entry, one-way x3100 M4. These servers comes standard with many advanced availability features, including RAID for high system reliability. High-performance, low-voltage system memory for speed and efficiency as well as enhanced systems management control. As universal servers, they are offered in flexible tower models and can be rack-mounted using a tower-to-rack conversion kit.

The System x3300 M4 server is a compact 4U two-way, SMP-capable Xeon processor-based platform designed with integrated high-availability features for small-and-medium-sized businesses as a departmental or branch office server. They process print and file transactions or office suite applications with ease.

These servers are ideal for clients who require up to sixteen core processing power, ample memory, and storage capacity, and high-speed I/O scalability. These servers are ideal for business platforms to run everyday business applications.


Back to top
Product number

The following are newly announced features on the specified models of the IBM xSeries® 7382 machine type:

The following are features already announced for the 7382 machine type:

The following are features already announced for the 3331 machine type:

The following feature numbers are automatically added to the 5372-SWX HIPO order whenever one of the hardware system units are configured in an order.

Model conversions

None

Feature conversions

None

Business Partner information

If you are a Direct Reseller - System Reseller acquiring products from IBM , you may link directly to Business Partner information for this announcement. A PartnerWorld® ID and password are required (use IBM ID).

https://www.ibm.com/partnerworld/mem/sla.jsp?num=112-130

Back to top
Publications

The following publications and CD-ROMs are shipped with the x3300 M4 servers:

  • The System x3300 M4 Installation and Service Guide contains an introduction to the computer, installation and setup, installing options, reference information, and problem determination. The installation and service guide has easy-to-use text and pictorials to enable you to quickly set up the System x3300 M4 server.
  • Publications CD

Note: Software versions, features, and functions shipped with these systems may change as new releases become available or may be discontinued at any time.

The x3300 M4 Installation and Service Guide

http://publib14.boulder.ibm.com/infocenter/systems

IBM Publications Center Portal

http://www.ibm.com/shop/publications/order

The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge.

Source file publications

These files can be used with the BookMaster® and DCF-licensed programs to create unmodified printed copies of the manuals. The source files can also be used with the BookManager® BUILD licensed program to create unmodified displayable softcopy manuals. Terms and conditions for use of the machine-readable files are shipped with the files.


Back to top
Services

Global Technology Services

IBM services include business consulting, outsourcing, hosting services, applications, and other technology management.

These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an on-demand business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-IBM offerings. IBM is your one-stop shop for IT support needs.

For details on available services, contact your IBM representative or visit

http://www.ibm.com/services/

For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit

http://www.ibm.com/services/continuity

For details on education offerings related to specific products, visit

http://www.ibm.com/services/learning/index.html

Select your country, and then select the product as the category.

System x and BladeCenter support services

Recommended core technical support

When you buy IBM System x technology, include the support services you need -- to help keep both your hardware and software working for you, day after day, at peak performance. It's your first step toward helping to protect your investment and sustain high levels of system availability. We offer service-level and response-time options to fit your business needs. And we'll help you get started with a core support package that includes:

  • Continuous system monitoring

    Electronic monitoring that helps speed up problem-solving with automated, early detection of potential problems and system errors.

  • Hardware maintenance

    World-class remote and on-site hardware problem determination and repair services.

  • Software technical support

    Access to help line calls for fast, accurate answers to your questions during installation and throughout ongoing operations.

For more information, visit

http://www.ibm.com/servers/eserver/xseries/services.html

Back to top
Technical information

Specified operating environment

Physical specifications

The x3300 M4

Note: US, LA, CAN x=U Brazil x=P Argentina x=T EMEA x=G

72.5-inch Drive bays provide 8.0 TB using 8x 1 TB SFF SAS HDD options, this can be doubled to 16 TB with optional 8x 2.5-inch HDD upgrade. (Special bid models support up to sixteen 2.5-inch bays with an additional 8 TB of HDD capacity for a total of 16 TB).

3.5-inch Drive bays provide 12 TB as standard using 4x 3 TB LFF SAS/SATA HDD options. This can be doubled to 24 TB with optional 4x 3.5-inch HDD upgrade.

For the latest information on supported HDD options, visit

http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/

10Twelve DIMM slots that enable you to deploy up to 384 GB of DDR3 SDRAM Registered DIMM memory, with 12 slots populated with 32 GB DIMMs optional, maximum 192 GB using 16 GB DIMMS optional, 2 GB or 4 GB memory standard.

11These systems contain an integrated management module that provides a set of monitoring and alert features. Refer to the Description section for details.

12The 460-watt power supply is designed to support all systems. Some models come with an HS redundant 550-watt power supply.

13Five PCI-e slots from processor 1. When the second processor is fitted, this adds another PCIe slot, giving a total of six.

14One PCIe 3.0 x8 slots and one PCIe Gen2 x8 slots operate at electrical x4.

15The PCIe Gen2 x8 slot can optionally be changed to a PCI-X slot via interposer card.

SATA DVD drive characteristics16
  • Formatted capacity: 650 MB
  • Average access time including latency: Less than 85 ms
  • Sustained data transfer rate: 3,000 to 7,200 KBps
  • Burst data transfer rate
    • ATA PIO mode 4: 16.6 MBps
    • ATA Multiword DMA Mode 2: 16.6 MBps
  • Technology: Full constant angular velocity (CAV)

16Actual playback speed varies and is often less than maximum.

Video subsystem
  • Matrox G200eR2 Video Graphics Controller
  • Integrated on planar and connected to the PCI bus
  • SVGA compatible video controller (Matrox G200eR2)
  • DDR3-528MHz SDRAM video memory controller.
  • Video memory is not expandable in this system

Supported video mode capabilities for the SVGA PCI controller

Notes :

  • The grayed ones are supported only if the monitor contains this resolution in his EDID.
  • The connector is a 15-pin D-shell; a video cable of 1.8 meters is the maximum supported length.
Dimensions
  • Tower:
    • Width: 175.8 mm (6.92 in); 235 mm (9.25 in) with tower
    • Depth: 678.4 mm (26.71 in)
    • Height: 437.7 mm (17.23 in)
    • Weight: 22.0 kg (48.46 lb) (minimum configuration)
    • Weight: 29.7 kg (65.42 lb) (maximum configuration)
  • Rack
    • Width: 422.9 mm (16.65 in)
    • Depth: 625.0 mm (24.61 in)
    • Height: 175.8 mm (6.92 in)
    • Weight: 20.5 kg (45.15 lb) (minimum configuration)
    • Weight: 28.2 kg (62.11 lb) (maximum configuration)
Electrical

Models with 460 W power supplies:

  • 100 to 127 nominal V ac; 50 - 60 Hz; 6.4 A
  • 200 to 240 nominal V ac; 50 - 60 Hz; 3.2 A
  • Input kilovolt-amperes (kVA) (approximately):
    • Minimum configuration: 0.10 kVA
    • Maximum configuration: 0.64 kVA

Models with 550 W power supplies:

  • 100 to 127 nominal V ac; 50 - 60 Hz; 6.5 A
  • 200 to 240 nominal V ac; 50 - 60 Hz; 3.3 A
  • Input kilovolt-amperes (kVA) (approximately):
    • Minimum configuration: 0.11 kVA
    • Maximum configuration: 0.66 kVA

Models with 750 W power supplies:

  • 100 to 127 nominal V ac; 50 - 60 Hz; 8.9 A
  • 200 to 240 nominal V ac; 50 - 60 Hz; 4.5 A
  • Input kilovolt-amperes (kVA) (approximately):
    • Minimum configuration: 0.12 kVA
    • Maximum configuration: 0.90 kVA
  • Btu output: ship configuration - 392.3 Btu/hr (115 watts ac)
  • Btu output: full configuration - 2900.2 Btu/hr (850 watts ac)
  • Acoustical noise emission levels:
    • 5.5 bels (idling)
    • 6.0 bels (operating)

Note: The noise emission level stated is the declared (upper limit) sound power level, in bels, for a random sample of machines. All measurements made in accordance with ISO 7779 and reported in conformance with ISO 9296.

These servers are intended for use as floor-standing servers and are tested and designed to operate in a horizontal position. These servers can also be used as a rack model with the optional rack install kit.

Standards

These systems support or comply with the following standards:

  • Multiprocessor Specification (MPS) 1.4
  • Peripheral Component Interconnect (PCI) specification 2.2
  • Peripheral Component Interconnect (PCI-X) specification v2.1
  • PCI-Express specification 1.0
  • Hardware-enabled to meet the International Organization for Standardization (ISO) 9241, Part 3
Equipment approvals and safety
  • FCC - Verified to comply with Part 15 of the FCC Rules, Class A
  • Canada ICES-003, issue 4, Class A
  • UL/IEC 60950-1
  • CSA C22.2 No. 60950-1-07
  • NOM-01916
  • Argentina IEC60950-1

16This server model is certified by the respective UL and NOM agencies.

Standards

Reference information:

Operating environment
  • Environment temperature:
    • Server on: 5°C to 40°C (41°F to 104°F); altitude: 0 to 915 m (3,117 ft)
    • Server on: 10°C to 32°C (50°F to 90°F); altitude: 915 m (3,000 ft) to 2,134 m (7,000 ft)
    • Server on: 10°C to 28°C (50°F to 83°F); altitude: 2,134 m (7,000 ft) to 3,050 m (10,000 ft)
    • Server off: 5°C to 45°C (412°F to 113°F)
    • Shipping: -40°C to 60°C (-40°F to 140°F) Altitude: 10,700 m (35,105 ft)
    • Relative humidity: 5% - 100%
    • Maximum dew point: 29°C (84.2°F)
  • Humidity:
    • Server on: 20% to 80% , Max. Dew Point 21°C, Max. rate of change 5°C/hr
    • Server off: 8% to 80%, Max. Dew Point 27°C
  • Maximum altitude: 2,134 m (7,000 ft)
Hardware requirements

For attended installation of an operating system, this server requires a compatible:

  • Keyboard
  • Mouse
  • HDD
  • Display (C117, T115, T117 or equivalent)

Unattended or remote installation may be performed without requiring some or all of these components. Review your unattended software installation program information for specific hardware configuration requirements.

For service, the server requires a compatible:

  • Keyboard
  • Mouse
  • HDD
  • Display

When having the unit serviced, plan to have these components attached to your server either directly or indirectly using a console switch.

Software requirements
Programming requirements

The following network operating systems are supported in the x3300 M4 servers:

  • Microsoft
    • Windows Server 2008, (32 bit and EM64T)
    • Windows Server 2008, R2
    • Windows Small Business Server 2008 (Premium and Standard
  • VMware
    • VMware ESX Server 4.1
    • VMware ESXi Server 4.1
    • VMware vSphere 5
    • VMware ESXi 5.0
  • Linux
    • SUSE Linux™ Enterprise Server 10 for AMD64/EM64T
    • SUSE Linux Enterprise Server 10 with Xen for AMD64/EM64T
    • SUSE Linux Enterprise Server 10 for x86 SP4
    • SUSE Linux Enterprise Server 11 SP1 for x86-64
    • SUSE Linux Enterprise Server 11 for AMD64/EM64T
    • SUSE Linux Enterprise Server 11 64-bit (includes KVM)
    • Red Hat Enterprise Linux 5 Server Edition
    • Red Hat Enterprise Linux 5 x64 Edition includes KVM
    • Red Hat Enterprise Linux 5.7 SE x64
    • Red Hat Enterprise Linux 5 Server with Xen x64 Edition
    • Red Hat Enterprise Linux 6 Server Edition
    • Red Hat Enterprise Linux 6 Server x64 Edition includes KVM
    • Red Hat Enterprise Linux 6.1 SE x64

Note: Certification is planned for these operating systems. For additional information on support, certification, and versions on network operating systems, visit

http://www.ibm.com/support/
Compatibility

The System x3300 M4 server systems contain licensed system programs that include set configuration, set features, and test programs. System BIOS is loaded from a 'flash' EEPROM into system memory. This BIOS provides instructions and interfaces designed to support the standard features of the x3300 M4 server and to maintain compatibility with many current software programs.

To view detailed information on the Internet about IBM and non-IBM devices, adapters, software, and network operating systems supported with x3300 servers, visit

http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/

Contact your IBM representative, IBM Business Partner, or refer to the IBM Sales Manual for information on the compatibility of hardware and software for x3300 servers. The Sales Manual is updated periodically as new features and options are announced that support these servers.

Limitations
  • The System x3300 M4 servers support 384 GB6of system memory when you add a 32 GB memory RDIMMs in each of 12 DIMM slots. All supported system memory is addressable through direct memory access (DMA). The x3300 M4 server supports 2 GB, 4 GB, 8 GB, 16 GB, and 32 GB memory synchronized with processor FSB bandwidth. DIMMs must be installed in matched pairs. Refer to the Planning information section for supported memory options.
  • Mixing microprocessors of different speeds or cache size is not supported.
  • Use the version of ServerGuide shipped with the system, or a later version, to load software and drivers. Earlier versions of ServerGuide may not be compatible with the server.

x3300 M4 is shipped standard with one processor which only has 6 DIMM sockets attached.

Refer to the Software requirements section for operating system limitations.

Solid-state memory cells have an intrinsic, finite number of write cycles that each cell can incur. As a result, each solid-state device has a maximum amount of write cycles to which it can be subjected, documented as TBW (Total Bytes Written). IBM is not responsible for replacement of hardware that has reached the maximum guaranteed number of write cycles. This limit may be revealed as the device failing to communicate to system generated commands or become incapable of being written to.

6Twelve DIMM slots that enable you to deploy up to 384 GB of DDR3 SDRAM Registered DIMM memory, with 12 slots populated with 32 GB DIMMs optional, 2 GB or 4 GB memory standard.

User group requirements

This announcement satisfies or partially satisfies requirements from one or more of the worldwide user group communities. Groups include COMMON, COMMON Europe, Guide Share Europe (GSE), InterAction (Australia/New Zealand), Japan Guide Share (JGS), and SHARE Inc.

Planning information

Customer responsibilities
Customer setup

The x3300 M4 servers are designated as customer setup. Customer setup instructions are shipped with systems and options.

Bay configuration

The server contains 10 drive bays. The eight 3.5-inch hot-swap or simple-swap bays or the sixteen 2.5-inch hot-swap bays are located on the lower half of System x3300 tower models. These bays are ready for various supported hot-swap HDD drive option installation. The two bays on the top portion of tower models are designed primarily for removable media devices. One bay contains the DVD-ROM drive, while the remaining one 5.25-inch half-high bays can support tape backup or other devices.

SAS cabling considerations

The x3300 M4 system can contain two backplanes maximum. Each 3.5-inch backplane supports four drives, and each 2.5-inch backplane support eight drives. The second 2.5-inch backplane is enabled with expander.

The DVD is SATA attached.

External SAS attachment

In the configurations where an external SAS device attachment is required, a support SAS adapter is required. Download crack ground control 2 operation exodus.

External serial attachment

To attach an external serial cable RS-232, use the serial connector at the rear of the system.

Processor upgrades

The following processor upgrades are supported:

Supported memory options

The following memory options are supported:

  • 2GB (2Gb, 1Rx8, 1.35V) PC3L-10600R ECC LP RDIMM (49Y1405)
  • 4GB (2Gb, 1Rx4, 1.35V) PC3L-10600R ECC LP RDIMM (49Y1406)
  • 4GB (2Gb, 2Rx8, 1.35V) PC3L-10600R ECC LP RDIMM (49Y1407)
  • 8GB 2Rx4 2Gbit PC3L-10600R LP RDIMM 1.35V Capable (49Y1397)
  • 16GB (4Gb,2Rx4,1.35V) PC3-10600 DDR3-1333 LP RDIMM (49Y1563)
  • 2GB (2Gb,1Rx8,1.35V) DDR3-1333 LP UDIMM (49Y1403)
  • 32 GB (1x32Gb, 4Rx4, 1.35V) PC 3L-10600 CL9 ECC DDR3 (90Y3105) DDR3 1333 MHz LP LR-DIMM (when available)
  • 16GB (2Gb, 4Rx4, 1.35V) PC3L-8500R LP RDIMM (49Y1400)
  • 4GB (1x4GB, 2Rx8, 1.5V) PC3-12800 CL11 ECC DDR3 1600MHz (90Y3178) LP RDIMM
  • 16GB (1x16GB, 2Rx4, 1.5V) PC3-12800 CL11 ECC DDR3 1600MHz (00D4968) LP RDIMM
Power supply requirements

These models contain either one 460-watt or one 550-watt power supply, model dependent, which is a hot-swap capable supply. When not using redundancy, one hot-swap supply has enough power to supply a fully loaded box. If redundancy is required, you should install additional power supplies to ensure sufficient power will be available. A fault light illuminates when a power supplies fails.

Optional rack installations

These models are optionally installable as rack units and are designed so they can be installed in an industry-standard 19-inch rack cabinet such as the NetBAY42 or NetBAY25. The x3300 M4 server system requires a rack mount kit for rack installation. In addition, it can also be installed in the deeper NetBAY42 ER.

If you choose not to use an IBM rack, the cabinet must meet EIA-310-D standards for mounting flanges and hole clearances with front to rear mounting of 70 - 73 cm (27.5 - 28.5 in). The rack must provide sufficient room in front of the forward EIA flange to allow for bezel attachment. The standard for 310-D suggests 49 mm (1.9 in) clearance. It must also provide adequate room at the rear of the rack, behind the rear flange for cable management; the System x3300 M4 server requires approximately 16.6 cm (6.5 in) in this space.

The rack should include perforated front and rear doors and must not prevent the flow of cool air into or out of the rack. The weight handling capacity of the rack is 22.7 kg (50 lb). Finally, the rack must provide proper stabilization so that the rack does not become unstable when servers are pulled out of service.

Cable orders

Dual 10/100/1000 Mbps, full-duplex Ethernet PCI controllers, standard with the x3300 M4 server, are connected directly to independent RJ-45 connectors. The RJ-45 connectors provide a 10BaseT, 100Base-TX, or 1000Base-TX interface for connecting twisted-pair cable to the Ethernet network. Cabling is not included with the server. To connect the Ethernet controller to a repeater or switch, use a UTP cable with RJ-45 connectors at both ends. For 100/1000 Mbps operation, Category 5 cabling must be used. For 10 Mbps operation, Category 3, or better, cabling must be used.

There are no additional cabling requirements, other than for system power, keyboard, mouse, and monitor connections.

Installability

The System x3300 M4 server requires about 30 minutes for installation. Installation includes unpacking, setting up, and powering on the system. Additional time is required to install an operating system, additional adapters, or features.

Packaging

The system is shipped as a single package. The country kit carton is contained inside the top portion of the system unit carton.

Supplies

For users: IBM System x3300 M4 servers can be purchased through the dealers around the world.

Security, auditability, and control

Security and auditability features include:

  • Power-on and remote-control password functions provide controls of who has access to the data and server setup program on the server.

It is a customer's responsibility to ensure that the server is secure to prevent sensitive data from being removed.

The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities.


Back to top
IBM Electronic Services

IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent.

The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems.

The Electronic Service Agent™ is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM . Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server.

To learn how Electronic Services can work for you, visit

http://www.ibm.com/support/electronic

Back to top
Terms and conditions

IBM Global Financing

Yes

To obtain copies of the IBM Statement of Limited Warranty, contact your reseller or IBM .

In the United States, call 800-IBM-SERV (426-7378), or write to:

Warranty Information
P.O. Box 12195
Research Triangle Park, NC 27709
Attn: Dept JDJA/B203

Warranty period

  • System x3300 7382 - Three years
  • Optional features - One year

Note: For configurations that support the RAID battery, the RAID battery will be warranted for one year effective on its 'date of installation.' All other product warranty terms for the machine remain unchanged.

An IBM part or feature installed during the initial installation of an IBM machine is subject to a full warranty effective on the date of installation of the machine. An IBM part or feature which replaces a previously installed part or feature assumes the remainder of the warranty period for the replaced part or feature. An IBM part or feature added to a machine without replacing a previously installed part or feature is subject to a full warranty effective on its date of installation. Unless specified otherwise, the warranty period, type of warranty service and service level of a part or feature is the same as the machine it is installed in.

Note: Solid-state memory cells have an intrinsic, finite number of write cycles that each cell can incur. As a result, each solid-state device has a maximum amount of write cycles to which it can be subjected, documented as TBW (Total Bytes Written). IBM is not responsible for replacement of hardware that has reached the maximum guaranteed number of write cycles. This limit may be revealed as the device failing to communicate to system generated commands or become incapable of being written to.

Warranty service

If required, IBM provides repair or exchange service, depending on the type of warranty service specified below for the machine. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines On-site Service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts. Service levels are response-time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM's normal service area. Contact your local IBM representative or your reseller for country- and location-specific information.

The type of service is Customer Replaceable Unit (for example, keyboard, mouse, speaker, memory, or hard disk drive) Service and On-site Service.

Customer Replaceable Unit (CRU) Service

IBM provides a replacement CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM at any time on your request. A CRU is designated as being either a Tier 1 (mandatory) or a Tier 2 (optional) CRU. Installation of Tier 1 CRUs, as specified in this announcement, is your responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for the installation. You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service specified below, On-site Service.

Based upon availability, a CRU will be shipped for next-business-day (NBD) delivery. IBM specifies in the materials shipped with a replacement CRU whether a defective CRU must be returned to IBM . When return is required, return instructions and a container are shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

The following parts have been designated as Tier 1 CRUs:

  • DDR3-1333 memory
  • Hard disk drive
  • Hot-swap power supply
  • Optical drive
  • CMOS battery
  • Misc kit
  • SAS cable
  • Backplane signal Y cable
  • Front IO module
  • Simple-swap back plate
  • Hot-swap SAS/SATA cage 8x2.5'
  • Redundant power cage
  • Power SMBUS Cable
  • NVIDIA Quadro 600
  • NVIDIA Quadro 2000
  • Half-high SATA DVD-ROM
  • Half-high SATA multi-burner
  • 550 W redundant PSU
  • 750 W high efficiency platinum AC power supply
  • Backplane
  • ServeRAID M1115 SAS/SATA Controller
  • ServeRAID M5120
  • ServeRAID H1110 SAS/SATA Controller
  • Power converter from raptor to norton cable
  • Dual port adapter
  • ServeRAID M5110
  • Backplane asm
  • PCI-X interposer conversion riser card
  • SSD
  • Broadcom NetXtreme I Quad Port GbE Adapter
  • Broadcom NetXtreme I Dual Port GbE Adapter
  • Raptor CR2 backplane
  • 460 W fixed PSU
  • Emulex 10GbE Virtual Fabric Adapter III
  • Fan asm
  • Rear fan asm

The following parts have been designated as Tier 2 CRUs:

  • Heatsink
  • Planar
  • CPU board
  • Additional CPU Mech kit
  • Intel Xeon Processor
  • Redundant power kit

The following parts are designated as structural:

  • Tower bezel kit
  • Tower to rack kit
  • Label GBM
  • Chassis base
  • Chassis top
  • Chassis left
  • Air duct
  • Bezel blanks
  • EMC shield kit
  • SS EMC plate kit
  • Filler
  • Remote RAID battery holder
  • Opt wheel USB
  • Power cord
  • Keyboards

Structural parts: Purchase and replacement of structural parts (components, such as chassis assembly, top cover, and bezel) is customer responsibility. If IBM acquires or installs a structural component at your request, you will be charged for the service.

On-site Service

This provides On-site Repair, 9 hours per day, Monday through Friday excluding holidays, NBD response. IBM or your reseller will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. On-site Service is not available in all countries, and some countries have kilometer or mileage limitations from an IBM service center. In those locations where On-site Service is not available, the normal in-country service delivery is used.

Call IBM at 1-800-IBM-SERV (426-7378) to assist with problem isolation for hardware to determine if warranty service is required. Telephone support may be subject to additional charges, even during the limited warranty period.

Calls must be received by 5:00 p.m. local time in order to qualify for NBD service.

International Warranty Service (IWS)

IWS is available in selected countries or regions.

The warranty service type and the service level provided in the servicing country may be different from that provided in the country in which the machine was purchased.

Under IWS, warranty service will be provided with the prevailing warranty service type and service level available for the IWS-eligible machine type in the servicing country, and the warranty period observed will be that of the country in which the machine was purchased.

To determine the eligibility of your machine and to view a list of countries where service is available, visit

http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=GCOR-3FBJK2

For more information on IWS, refer to Services Announcement 601-034, dated September 25, 2001 .

Licensing

Programs included with this product are licensed under the terms and conditions of the License Agreements that are shipped with the system.

Maintenance services

ServicePac , ServiceSuite , ServiceElect, and ServiceElite

ServicePac® , ServiceSuite® , ServiceElect, and ServiceElite provide hardware warranty service upgrades, maintenance, and selected support services in one agreement.

Warranty service upgrade

During the warranty period, a warranty service upgrade provides an enhanced level of On-site Service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of On-site Service acquired by the customer. Service levels are response-time objectives and are not guaranteed.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines On-site Service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts.

CRUs will be provided as part of the machine's standard warranty CRU Service except that you may install a Tier 1 CRU yourself or request IBM installation, at no additional charge, under one of the On-site Service levels specified below.

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

Maintenance service

If required, IBM provides repair or exchange service, depending on the type of maintenance service specified below for the machine. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines On-site Service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts. Service levels are response-time objectives and are not guaranteed.

CRU Service

If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM at any time on your request.

IBM specifies in the materials shipped with a replacement CRU whether a defective CRU must be returned to IBM . When return is required, return instructions and a container are shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

On-site Service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

Maintenance service (ICA)

Maintenance services are available for ICA legacy contracts.

Alternative service (warranty service upgrades)

During the warranty period, a warranty service upgrade provides an enhanced level of On-site Service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of On-site Service acquired by the customer. Service levels are response-time objectives and are not guaranteed.

IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines On-site Service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts.

A CRU will be provided as part of the machine's standard warranty CRU Service except that you may install a Tier 1 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service specified below, On-site Service.

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

Maintenance service

If required, IBM provides repair or exchange service, depending on the type of maintenance service specified below for the machine. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM website. Certain machines contain remote support capabilities for direct problem reporting, remote problem determination, and resolution with IBM . You must follow the problem determination and resolution procedures that IBM specifies. Following problem determination, if IBM determines On-site Service is required, scheduling of service will depend upon the time of your call, machine technology and redundancy, and availability of parts. Service levels are response-time objectives and are not guaranteed.

CRU Service

If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, or hard disk drive), IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM at any time on your request.

IBM specifies in the materials shipped with a replacement CRU whether a defective CRU must be returned to IBM . When return is required, return instructions and a container are shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement.

On-site Service

IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose.

Non-IBM parts support

Warranty service

IBM is now shipping machines with selected non-IBM parts that contain an IBM field replaceable unit (FRU) part number label. These parts are to be serviced during the IBM machine warranty period. IBM is covering the service on these selected non-IBM parts as an accommodation to its customers, and normal warranty service procedures for the IBM machine apply.

Warranty service upgrades and maintenance services

Under certain conditions, IBM Integrated Technology Services repairs selected non-IBM parts at no additional charge for machines that are covered under warranty service upgrades or maintenance services.

IBM Service provides hardware problem determination on non-IBM parts (for example, adapter cards, PCMCIA cards, disk drives, or memory) installed within IBM machines covered under warranty service upgrades or maintenance services and provides the labor to replace the failing parts at no additional charge.

If IBM has a Technical Service Agreement with the manufacturer of the failing part, or if the failing part is an accommodations part (a part with an IBM FRU label), IBM may also source and replace the failing part at no additional charge. For all other non-IBM parts, customers are responsible for sourcing the parts. Installation labor is provided at no additional charge, if the machine is covered under a warranty service upgrade or a maintenance service.

IBM hourly service rate classification

One

Field-installable features

Yes

Model conversions

No

Machine installation

Customer setup. Customers are responsible for installation according to the instructions IBM provides with the machine.

Graduated program license charges apply

No

Biostar P4m80 M4 Drivers Download

Licensed Machine Code

IBM Machine Code is licensed for use by a customer on the IBM machine for which it was provided by IBM under the terms and conditions of the IBM License Agreement for Machine Code, to enable the machine to function in accordance with its specifications, and only for the capacity authorized by IBM and acquired by the customer. You can obtain the agreement by contacting your IBM representative or visiting

http://www.ibm.com/servers/support/machine_warranties/machine_code.html

IBM may release changes to the Machine Code. IBM plans to make the Machine Code changes available for download from the IBM System x technical support website.

http://www-304.ibm.com/systems/support

If the machine does not function as warranted and your problem can be resolved through your application of downloadable Machine Code, you are responsible for downloading and installing these designated Machine Code changes as IBM specifies. If you would prefer, you may request IBM to install downloadable Machine Code changes; however, you may be charged for that service.

Educational allowance

None


Back to top
Prices

For current prices, contact IBM at 888-Shop-IBM (746-7426) or visit

http://www-03.ibm.com/systems/x/

The following are features already announced for the 3331 machine type:

The following are newly announced features on the specified models of the IBM xSeries 7382 machine type:

The following are features already announced for the 7382 machine type:

Maintenance charges

For additional information on maintenance and pricing, please contact your IBM Sales Representative or your IBM Business Partner, or call 1-800-IBM-CALL (1-800-426-2255).

For ServiceElect (ESA) maintenance service charges, contact IBM Global Services at 888-IBM-4343 (426-4343).

ServicePac for Warranty and Maintenance

Refer to the following IBM website for applicable ServicePac information

http://www-935.ibm.com/services/us/its/html/servicepac_americas.html

These ServicePac offerings are valid for models announced in the United States.

Refer to the following IBM website for applicable ServicePac information

https://www-304.ibm.com/sales/gss/download/spst/servicepac/extProductSelectorWWW.do

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Offerings include financing for IT acquisition, including hardware, software, and services, from both IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit

http://www.ibm.com/financing

IBM Global Financing offerings are provided through IBM Credit LLC in the United States, and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer's credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice.

Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology lifecycle.


Back to top
Order now

To order, contact the Americas Call Centers or your local IBM representative, or your IBM Business Partner.

To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968).

Reference: YE001

The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products.


Note: Shipments will begin after the planned availability date.
Trademarks

Express Portfolio and Electronic Service Agent are trademarks of IBM Corporation in the United States, other countries, or both.

IBM, Express, System x, Tivoli, NetView, ServerProven, xSeries, PartnerWorld, BookMaster, BookManager, ServicePac, ServiceSuite and ibm.com are registered trademarks of IBM Corporation in the United States, other countries, or both.

Intel, Intel Xeon and Pentium are trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. IBM reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. Additional terms of use are located at

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative or reseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/us/